Garden Rake Head with Carbon Steel Tines and Detachable Design for Wooden Handles

Clear Leaves And Loosen Soil With This Garden Rake Head

You're raking leaves and the head wobbles loose mid sweep. You're constantly stopping to tighten it, and you're losing time on simple yard cleanup. This rake head attaches securely to wooden poles and handles dethatching, weeding, and soil prep around flower beds.

The carbon steel tines slide through the 3cm diameter hole at the neck and lock in place with nails through pre drilled mounting holes. Pick your size based on the job: five teeth span 17.5cm, six teeth span 20cm, seven teeth span 23.5cm, and eight teeth span 27cm. Each tine measures 10.5cm long and digs into compacted dirt or pulls thatch without bending.

The 26cm neck gives you reach without straining your back when you work vegetable rows or rake under shrubs. It weighs between 0.67kg and 0.94kg depending on tooth count, staying light enough for extended sessions. The carbon steel resists rust when stored outdoors or left in damp sheds.

The detachable design lets you swap heads quickly when switching from fine weeding to heavy debris removal. It stores flat in tool sheds or garages and takes up minimal wall space. The universal 3cm fitting works with most standard wooden handles you already own.

• FOUR TOOTH CONFIGURATIONS: Choose from five, six, seven, or eight tine options with widths spanning 17.5cm to 27cm for targeted garden tasks.
  
  
• CARBON STEEL TINES: Each 10.5cm tine cuts through compacted soil, pulls weeds, and removes thatch while resisting corrosion from moisture exposure.
  
  
• NAIL HOLE MOUNTING: Pre drilled holes lock the head onto wooden poles using nails, creating a stable connection that stays tight during use.
  
  
• 26CM NECK REACH: Extended neck length lets you work vegetable rows, flower beds, and under bushes without excessive bending or back strain.
  
  
• LIGHTWEIGHT BUILD: Weighs between 0.67kg and 0.94kg depending on tooth count, reducing arm fatigue during long weeding or raking sessions outdoors.
  
  
• QUICK DETACH SYSTEM: Remove the head from the pole in seconds to swap sizes, store compactly, or transport multiple heads to different work areas.
  
  
• 3CM UNIVERSAL FIT: Standard hole diameter works with most wooden garden handles, letting you use poles you already have in your shed or garage.
  
  
• MULTI SURFACE USE: Works on lawns, vegetable gardens, flower beds, gravel paths, and landscaping projects requiring soil loosening or debris removal tasks.

GARDEN RAKE HEAD SPECS

• Material: Carbon Steel
  
  
• Tooth Options: 5, 6, 7, 8
  
  
• Tine Length: 10.5cm
  
  
• Width Range: 17.5cm to 27cm
  
  
• Neck Length: 26cm
  
  
• Hole Diameter: 3cm
  
  
• Weight: 0.67kg to 0.94kg
  
  
• Mounting: Nail Holes
  
  
• Finish: Rust Resistant
  
  
• Handle Compatibility: Wooden Poles

PACKAGE INCLUDES:

• 1 x Garden Rake Head (Selected Tooth Count)